- Autor
- Wilthan, B.
- Schützenhöfer, W.
- Pottlacher, G.
- TitelThermophysical Properties of Five Industrial Steels in the Solid and Liquid Phase
- Datei
- DOI10.1007/s10765-017-2220-z
- Persistent Identifier
- Erschienen inInternational Journal of Thermophysics
- Band38
- Erscheinungsjahr2017
- Heft6
- Seiten83
- ISSN1572-9567
- Download Statistik1965
- Peer ReviewJa
- AbstractThe need for characterization of thermophysical properties of steel was addressed in the FFG-Bridge Project 810999 in cooperation with our partner from industry, Böhler Edelstahl GmbH & Co KG. To optimize numerical simulations of production processes such as plastic deformation or remelting, additional and more accurate thermophysical property data were necessary for the group of steels under investigation. With the fast ohmic pulse heating circuit system and a commercial high-temperature Differential Scanning Calorimeter at Graz University of Technology, we were able to measure the temperature-dependent specific electrical resistivity and specific enthalpy for a set of five high alloyed steels: E105, M314, M315, P800, and V320 from room temperature up into the liquid phase. The mechanical properties of those steels make sample preparation an additional challenge. The described experimental approach typically uses electrically conducting wire-shaped specimen with a melting point high enough for the implemented pyrometric temperature measurement. The samples investigated here are too brittle to be drawn as wires and could only be cut into rectangular specimen by Electrical Discharge Machining. Even for those samples all electrical signals and the temperature signal can be recorded with proper alignment of the pyrometer. For each material under investigation, a set of data including chemical composition, solidus and liquidus temperature, enthalpy, electrical resistivity, and thermal diffusivity as a function of temperature will be reported.
[674.76 KB]